In my time in this business (enterprise content management, records management, document management, etc.) I have been asked to help with a ‘shared drive problem’ more times than I can remember. This particular issue is analogous with the paperless office problem. Thirty years ago when I started my company I naively thought that both problems would be long gone by now but they are not.

I still get requests for purely physical records management solutions and I still get requests to assist customers in sorting out their shared drives problems.

The tools and procedures to solve both problems have been around for a long time but for whatever reason (I suspect lack of management focus) the problems still persist and could be described as systemic across most industry segments.

Yes, I know that you can implement an electronic document and records management system (we have one called RecFind 6) and take away the need for shared drives and physical records management systems completely but most organizations don’t and most organizations still struggle with shared drives and physical records. This post addresses the reality.

Unfortunately, the most important ingredient in any solution is ‘ownership’ and that is as hard to find as it ever was. Someone with authority, or someone who is prepared to assume authority, needs to take ownership of the problem in a benevolent dictator way and just steam-roll a solution through the enterprise. It isn’t solvable by committees and it requires a committed, driven person to make it happen. These kind of people are in short supply so if you don’t have one, bring one in.

In a nutshell there are three basic problems apart from ownership of the problem.

1.     How to delete all redundant information;

2.     How to structure the ‘new’ shared drives; and

3.     How to make the new system work to most people’s satisfaction.

Deleting redundant Information

Rule number one is don’t ever ask staff to delete the information they regard as redundant. It will never happen. Instead, tell staff that you will delete all documents in your shared drives with a created or last updated date greater than a nominated date (say one-year into the past) unless they tell you specifically which ‘older’ documents they need to retain. Just saying “all of them” is not an acceptable response. Give staff advance notice of a month and then delete everything that has not been nominated as important enough to retain.  Of course, take a backup of everything before you delete, just in case. This is tough love, not stupidity.

Structuring the new shared drives

If your records manager insists on using your already overly complex, hierarchical corporate classification scheme or taxonomy as the model for the new shared drive structure politely ask them to look for another job. Do you want this to work or not?

Records managers and archivists and librarians (and scientists) understand and love complex classification systems. However, end users don’t understand them, don’t like them and won’t use them. End users have no wish to become part-time records managers, they have their own work to do thank you.

By all means make the new structure a subset of the classification system, major headings only and no more than two levels if possible. If it takes longer than a few seconds to decide where to save something or to find something then it is too complex. If three people save the same document in three different places then it is too complex. If a senior manager can’t find something instantly then it is too complex. The staff aren’t to blame, you are.

I have written about this issue previously and you can reference a white paper at this link, “Do you really need a Taxonomy?”

The shared drives aren’t where we classify documents, it is where we make it as easy and as fast as possible to save, retrieve and work on documents; no more, no less. Proper classification (if I can use that term) happens later when you use intelligent software to automatically capture, analyse and store documents in your document management system.

Please note, shared drives are not a document management system and a document management system should never just be a copy of your shared drives. They have different jobs to do.

Making the new system work

Let’s fall back on one of the oldest acronyms in business, KISS, “Keep It Simple Stupid!” Simple is good and elegant, complex is bad and unfathomable.

Testing is a good example of where the KISS principle must be applied. Asking all staff to participate in the testing process may be diplomatic but it is also suicidal. You need to select your testers. You need to pick a small number of smart people from all levels of your organization. Don’t ask for volunteers, you will get the wrong people applying. Do you want participants who are committed to the system working, or those who are committed to it failing? Do you want this to succeed or not?

If I am pressed for time I use what I call the straight-line-method. Imagine all staff in a straight line from the most junior to the most senior. Select from both ends, the most junior and the most senior. Chances are that if the system works for this subset that it will also work for all the staff in between.

Make it clear to all that the shared drives are not your document management system. The shared drives are there for ease of access and to work on documents. The document management system has business rules to ensure that you have inviolate copies of important documents plus all relevant contextual information. The document management system is where you apply business rules and workflow. The document management system is all about business process management and compliance. The shared drives and the document management system are related and integrated but they have different jobs to do.

We have shared drives so staff don’t work on documents on ‘private’ drives, inaccessible and invisible to others. We provide a shared drive resource so staff can collaborate and share information and easily work on documents. We have shared drives so that when someone leaves we still have all their documents and work-in-process.

Please do all the complex processes required in your document management system using intelligent software, automate as much as possible. Productivity gains come about when you take work off staff, not when you load them up with more work. Give your staff as much time as possible so they can use their expertise to do the core job they were hired for.

If you don’t force extra work on your staff and if you make it as easy and as fast as possible to use the shared drives then your system will work. Do the opposite and I guarantee it will not work.

I own and run a computer software company called the Knowledgeone Corporation and we have specialised in what is now known as enterprise content management software since 1984 when we released our first product DocFind. We are now into the 8th iteration of our core and iconic product RecFind and have sold and installed thousands of RecFind sites where we manage corporate records and electronic documents.

I have personally worked with hundreds of customers to ensure that we understand and meet their requirements and I have also designed and specified every product we have delivered over the last 29 years so while I have never been a practicing records manager, I do know a great deal about records and document management and the vagaries of the practise all around the world.

My major lament is that many records managers today still want to run their ‘business’ in exactly the same way it was run 30 or 50 or even a hundred years ago. That is, as a physical model even when using computers and automated solutions like our product RecFind 6. This means we still see overly complicated classification systems and overcomplicated file numbering systems and overcomplicated manual processes for the capture and classification of paper, document images, electronic documents and emails.

It is a mindset that is locked in the past and can’t see beyond the confines of the file room.

I also still meet records managers that believe each and every employee has a responsibility to ‘become’ a junior records manager and both fully comprehend and religiously follow all of the old-fashioned and hopelessly overcomplicated and time-consuming processes laid out for the orderly capture of corporate documents.

I have news for all those locked-in-the-past records managers. Your approach hasn’t worked in the last 30 years and it certainly will not work in the future.

Smart people don’t buy sophisticated computer hardware and application software and then try to replicate the physical model for little or no benefit. Smart people look at what a computer system can do as opposed to 20,000 linear feet of filing shelves or 40 Compactuses and 30 boxes of filing cards and immediately realize that they have the power to do everything differently, faster, most efficiently and infinitely smarter.  They also realize that there is no need to overburden already busy end users by a forcing them to become very bad and very inconsistent junior records managers. End users are not hired to be records managers they are hired to be engineers, sales people, accountants, PAs, etc., and most already have 8 hours of work a day without you imposing more on them.

There is always a better way and the best way is to roll out a records and document and email management system that does not require your end users to become very bad and inconsistent junior records managers. This way it may even have a chance of actually working.

Please throw that old physical model away. It has never worked well when applied to computerised records, document and email management and it never will. Remember that famous adage, “The definition of insanity is to keep doing the same thing and to expect the results to be different”?

I guarantee two things:

1.     Your software vendor’s consultant is more than happy to offer advice and guidance; and

2.     He/she has probably worked in significantly more records management environments than you have and has a much broader range of experience than you do.

It doesn’t hurt to ask for advice and it doesn’t hurt to listen.

Have you ever had to remove files from shelving or cabinets and reallocate them to other spaces because a drawer or shelf is packed tight? Then had to do it again and again?

One of my favourite records managers used to call this the “Squishing” problem.

The squishing problem is inevitable if you start to load files from the beginning of any physical filing system, be it shelving or cabinets and unload file files from random locations as the retention schedule dictates. If you create and file parts (a new folder called part 2, part 3, etc., when the original file folder is full) then the problem is exacerbated. You may well spend a large part of your working life shuffling file folders from location to location; a frustrating and worthless, thankless task. You also get to inhale a lot of toxic paper dust and mites which is not a good thing.

You may not be aware of it but there is a very simple algorithm you can utilize to make sure the squishing problem never happens to you. It is usually referred to as the ‘Terminal Digit’ file numbering system but you may call it whatever you like. The name isn’t important but the operation is.

Importantly, you don’t need to change your file numbering system other than by adding on additional numbers to the end. These additional numbers are the terminal digits.

The number of terminal digits you need depends upon how many file folders you have to manage. Here is a simple guideline:

·         One terminal Digit (0 to 9) = one thousand files

·         Two Terminal Digits (00 to 99) = ten thousand Files

·         Three Terminal Digits (000 to 999) = greater than ten thousand files

Obviously, you also have to have the filing space and appropriate facilities available (e.g., boxes, bays, etc.,) to hold the required number of files for each terminal.

It is called the Terminal Digit system because you first have to separate your available filing space into a number of regular ‘terminals’. Each terminal is identified by a number, e.g., 0, 1, 2, 09, 23, 112, 999, etc.

The new terminal digit is additional and separate from your normal file number. It determines which terminal a file will be stored in. Let’s say your normal file number is of the format YYYY/SSSSSS. That is, the current year plus an automatically incrementing auto number like 2012/000189 then 2012/000190, etc. If we use two terminal digits and divide your available filing space into one hundred terminals (think of it as 100 equally sized filing slots or bays numbered 00 to 99) then your new file number format is YYYY/SSSSSS-99. The two generated file numbers above may now look like 2012/000189-00 and 2012/000190-01.

File folder 2012/000189-00 is filed in terminal number 00 and 2012/000190-01 is filled in terminal number 01. In a nutshell, what we are doing is distributing files evenly across all available filing space. We are not starting at terminal 00 and filling it up and then moving on to terminal 01, then terminal 02 when 01 is full etc. Finding files is even easier because the first part of the file number you look at is the terminal digit. If a file number ends in 89 it will be in terminal 89 in file number order.

The other good news is that when we unload files from the shelves say at end of life or at the point in the lifecycle when they need to sent offsite we will also unload files evenly across all available filing space. If the terminals are actually big enough and if you have calculated everything correctly you should never again suffer from the ‘squishing’ problem and you should never again have to ingest paper dust and mites when tediously shuffling files from location to location.

Obviously, there is a little more to this than sticking a couple of digits on the end of your file number. I assume you are using a computerised records management system so changes have to be made or configured to correctly calculate the now extended file number (including the new terminal digit) and your colour file labels will need to be changed to show the terminal digit in a prominent position.

There is also the question of what to do with your existing squished file store. Ideally you would start from scratch with your new numbering systems and terminals and wait for the old system to disappear as the files age and disappear offsite to Grace or Iron Mountain. That probably won’t be possible so you will have to make decisions based on available resources and budget and come up with the best compromise.

I can’t prove it but I suspect that the terminal digit system has been around since people began filing stuff. It is an elegantly simple solution to an annoying and frustrating problem and involves nothing more complicated than simple arithmetic.

The surprise is that so few organizations actually use it. In twenty-five plus years in this business I don’t think I have seen it in use at more than one to two-percent of the customers I have visited. I have talked about it and recommended it often but the solution seems to end up in the too-hard basket; a shame really, especially for the records management staff charged with the constant shuffling of paper files.

It may be that you have a better solution but just in case you don’t, please humour me and have another look at the terminal digit filing solution. It may just save you an enormous amount of wasted time and make your long-suffering records staff a lot happier and a lot healthier.